Question about Xerox Phaser Office Equipment & Supplies
...with the following error code. 07010.43:39050 Any help would be appreciated Your print head is stuck. Either the print head block has gotten ink in it and will not allow it to tilt, or the print ...
8650 waste tray stuck The waste tray will not come out of the printer. Is there a way to get it unstuck? Power off the printer and wait about 10 minutes. Power back on and try to remove it when you ...
Question about Xerox Phaser Office Equipment & Supplies
...is staying on the right edge of the drum and it seems as the paper goes through the printer it gets stuck on that ink. We use only Xerox ink and just replaced the maintenance kit thinking that would ...
Question about Xerox Phaser Office Equipment & Supplies
paper stuck between feed in and did not come out i have paper stuck problem
Paper getting stuck in fuser My phaser is getting jamed every print job. It getting stuck in the fuser unit. Any idea what I need to do Replace the Fuser Unit.
Question about Xerox Phaser Office Equipment & Supplies
error code 09,035.43:30419 on Xerox Phaser 8560 Ink count flag stuck after melting 2.5 Cyan Ink Sticks Check your ink sticks, one of them is most likely stuck.
Question about Xerox Phaser Office Equipment & Supplies
Xerox Phaser 8560 Print Error: 09,038.46:12058 with a blinking red LED lite. A black stick is stuck and not moving down the ink loader. Thats what the 46 means. But check all the sticks, one is ...
Question about Xerox Phaser Office Equipment & Supplies
Phaser 8400, can not pull the orange maintenance kit, it seems that it is stuck It is stuck when the machine is properly shut down? You can remove the left side cover and gently rotate the process ...
Phaser stuck warming up Stuck warming up. Will print a diagnostic page fine when unplugged/plugged, then warms up again. will print about once per day, randomly, then warm up again. Thanks! Your ...
07,010,43:25175 the paper keeps getting stuck and have this error 07,010.43 indicates the printhead is stuck in the tilted position, or is not able to tilt forward to the print position. This is a ...
72 questions posted
Usually answered in minutes!
436 Questions
284 Questions
262 Questions
152 Questions
147 Questions