Question about Seagate FreeAgent Computers & Internet
...usb base 4. remove the lower plastic cover 5. remove the tiny screws 6. remove the metal shield 7. remove the 3 base screws. 8. stick a standard screw driver into the lower holes and twist. One side ...
...removing all entries relating to USB in Device Manager and all associated USB drivers will force XP into refreshing the USB driver stack. Begin by unplugging all USB devices, then use Add/Remove ...
USB mouse. I tried updating drivers, no help. I decided my particular wild mouse was a stick pointer hardware problem. Since I do not use the stick I decided to disconnect it electrically.Here is what
...USB port while it's still being used without "Safely Removing Hardware" and it damages them. The following article may explain why. The "safely remove hardware" bit is used because removable drives ...
...cover, bridge the Positioner, DO NOT TOUCH anything in there and Manually spin the HDD Platter spindle to EXACTLY 3500 or 7200rpm (depending on drive) with a tiny speed-controlled motor and a ...
Question about Seagate FreeAgent Computers & Internet
...USB Device malfunctioned" error or "S.M.A.R.T. Capable But Command Failed" or "Disk boot failure. Insert system disk and press enter", "Hard drive not recognized", "Drive Mount Failure" or some other ...
Question about Seagate FreeAgent Computers & Internet
removing the base, and the two screws listed above, the external enclosure comes apart in two halves like a clamshell. The two halves have a parting line where a flat tipped screwdriver is inserted to
691 questions posted
Usually answered in minutes!
303 Questions
84 Questions
50 Questions
45 Questions