Twinhead SlimNote N12PI Notebook PC "remove back" Questions

...remove back cover ? f102 Before you remove the back cover, need to unscrew the nails from the back cover. then remove the keyboard (carefully remove the connector ribbon cable), then the top cover ...

remove all screw on the back of your laptop. 6. remove upperchassis. 7. remove 2 screw that hold motherboard from lowerchasis. 8. take motherboard out from lowerchasiss. 9. now you can see the thermal

...back to remove the wireless antena cables. 2. Open the power cover (remove 2 scews on the power cover). 3. removed keyboard. 4, remove 4 scews (silver scews) that make screen attched the the laptop ...

...back has the Vent in it)http://www.insidemylaptop.com/remove-replace-lcd-screen-inverter-hp-pavilion-dv6000-laptop/http://www.tim.id.au/blog/tims-laptop-service-manuals/#toc-compaqhp[Use the dv6700 ...

...remove the whole back, you will need to remove these panels, and then remove the keyboard, as there are (if memory serves me right), some screws under the keyboard, which hold the back in place, as ...

...from lowercase. 8. remove all screw on the back. 9. remove heat sink, and remove 1 screw under heat sink. 10. that's all, you can remove uppercase and repair it. i hope this help you. good ...

Remove the bracket from the old hard drive and install it onto the new hard drive. 12. Slide the new hard drive into the notebook, making sure that it is firmly connected. 13. Place the CD/Floppy disk

...back of the computer , remove plastic cover , there you will find a battery, Lithium (size of a quarter), discoonect the connection for 30 seconds , place it back if no connection present, remove the ...

...remove the strip on the upper side of the keyboard. After removing you will see two screws down with the keyboard . Remover the screws and remover the connector of keyboard that connects the keyboard ...

Remove the battery4. Dismantle back screws and pop open the cover.5. Locate the Dry cell (Button Cell)6. Remove the button cell from the laptop.7. Wait for 10 Seconds8. Put back the button cell.9. Fix