Seagate FreeAgent Go 250 GB USB 2.0 Hard Drive "disconnect" Questions

disconnected while copying and now will not read I accidentally disconnected my harddrive from my computer while copying from one hard drive to another. Now it will not read while plugged in and the ...

External Hard Disk problem to connect After transfering half data it get disconnect and again connect why this problem in my External Hard Disk Try connecting in safe mode with networking and then ...

...ear to it, to test if the drive is spinning and working. Do this while it is powered on. Also, try disconnecting the USB cable, reboot the computer, re-connect USB cable to another USB port on ...

how to safely remove my hardrive The first time I disconnected my hardrive everything was just fine, now I don't know how to disconnect to then pull the usb cable once the usb hard drive ...

seagate drive not recognized by mac after two months use Disconnect, remove drivers, reconnect, and allow it to be detected and reinstall drivers. Please let me know if you need further assistance. ...

...Hopefully just the power supply to the drive overheated and did not do any damage to your data. Disconnect the unit from the mains (duh!) and carefully disassemble the unit until you can get at ...

broken usb plug in part - small piece disconnected Easiest/cheapest to pull current drive out and put it in a new enclosure. Here's a good possible: ...

Its slow, does not boot up after shutdown (unless re-plugged again) disconnects randomly and has hard time searching files! download the seagate utility from seagate and run a diagnostic. It will tell

accidentally disconnected my seagate go mac (320) and now the computer does not recognize it. just plugin your hard disk and restart your computer if it shows you cheking hard disk don't try to esc ...

...to my Dell Insiprion 1700, it is not recognized by the computer, but it does power up. When I disconnect the harddrive from the computer, the power light does not go out, which it is suppose to ...