Lexmark All-in-One Printer with PictBridge "stuck tap cartridge" Questions

...common problem is a small piece of tape stuck on bottom of new cartridge. The tap which protects the contacts in shipping, frequently rips when being removed. Remove the cartridge and examine

...stuck. The cradle is way off to the right side. I've tried restarting....it does not move. Fixed it myself...found this link: ...

...tap is removed. Small pieces of tape frequently are stuck to the cartridge bottom causing errors. Confirm you have the correct cartridges (# 34 for Black(HIGHYIELD) and #33 for color). Reseat the ...

...stuck in the nozzles (this happens when you don't use the printer for some time). You may try either printing a cartridge/nozzle cleaner page (some printers call this a nozzle check, basicly printing ...

...cartridge lights, but the one right above them. open the top cover and check that any paper is stucked inside or not.. after that disconnect the power cable tap the on button for 10 times...it will ...

tap to wash out ink from inside casework. When dry printer still functions OK (lucky?) Where did all that ink come from and will it happen again? Michael G. The ink could of come from a cartridge that

...cartridge in , took off tape , closed lid, it won't reset to copy. keeps saying cover open. i've redone it several times.it seems to be stuck on cover open. there is a sensor in the printer that goes ...

...stuck in the printer and the lights are just blinking, but it prints anything from the computer. Hi, Your printer might need some servicing ,u can try out the following steps in order to service the ...

...STUCK OVER THE HOLE HENCE STARVING THE MACHINE OF TONER. I have found that if you don't use make a lot of color copies the toner can bind up in the cartridge. Pull out the cyan toner, shake it up and ...

...tap on the 'L tool' if the ball is stuck). If you can't see the ball just above the "push" then peel back the top label on the reservoir side of the cartridge to expose the Sealing Ball. This is the ...