Question about Sharp Aquos Televison & Video
...tv power is normally turned on/off) This problems is very common on Sharp tv after a year or two.I have one too 46" Aquos.The tv Tuner signal board have problems,but this tv still usable.My tv does ...
tv power and OPC lights again,have go thought this process pushing power remote switch again have to do this like 3 or 4 times sometimes before the tv to work.Tries websites like Shopjimmy.com or Ebay
Question about Sharp Aquos Televison & Video
...tv will not come on and power and theopc is flashing. Ok This is how to troubleshoot the TV, there are lights on the front and you are mainly concerned with two of these lights (the power light and ...
Question about Sharp Aquos Televison & Video
...tv LED power light turn on solid first.Few mins,than LED,OPC flahes.Power LED,OPC flashes,push power button again,do this at leat 5 or 6 times somtimes the backlight will come back on and work.The ...
...power and OPC lights Tv does not come on and no controls work and the power and OPC lights blink on the front of the TV - it is 18 months old If you have tried to reset the TV by unplugging it for 2 ...
...tv work.The Power lite and OPC lite continue to blinks.Push the power button again.Countinue to push the power button 3 or 4 each times the Power and OPC lites continue blinks.Push the power buton ...
...the support person said he needs to order new Power supply which takes about 3 to 4 days. Couple of days later, Sharp support contractor replaced my TV's Power supply and it is now working
Question about Sharp Aquos Televison & Video
...TV doesn't turn on. Power and OPC blink together twice, then the OPC light blink once and start sequence again. I tried some of the recommendations found in the site with no results These blinks ...
power is on... The TV was on for about 6 hours when it suddenly turned itself off, then turned itself back on, showing the green power light, but no picture. In a few seconds, the power and OPC lights
Question about Sharp Aquos Televison & Video
power and opc leds blinkin, two times the power led then power and opc one time, is this a error code? These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one
1,180 questions posted
Usually answered in minutes!
339 Questions
295 Questions
241 Questions
202 Questions
163 Questions