Sharp Aquos LC-42D62U 42 in. LCD HDTV "tv audio wont" Questions

...audio output, from the tv, it wont push out the sound the way that it should. You will have to downgrade to using audio composite cables to connect to your external speaker system from the audio ...

...Now my Tv has a trouble shooting problem. I mean, It's Audio/Video is ok. But RF is not ok. how I can solve this problem. If it can solve by using any settings, pls explain me... ...

...COMES ON, IT BLINKS CONSTANTLY, AND NOTHING WORKS TO EITHER TURN IT OFF OR CHANGE CHANNELS OR RECEIVE ANY AUDIO Call the number on your TV manule and tell them you probley have a Loos Fuse in your ...

...ac cord the left speaker buzzes loudly and tv wont turn on. Audio output IC section fault. Might be a shorter audio ouput IC. Contact any service

...Audio board maybe shorted out causing the TV to go into "Protection Mode". I would try unplugging the Audio board from the main power supply board and main mother board to see if the TV powers up ...

...tv, like an audio reciever. Then you could just plug the headphones into that and voila, you have sound. Also recievers give better audio quality. The other thing I would suggest is getting wireless ...

...tv on and there was no audio. Pushed the mute button and it shows the red around the speaker. Push it again and the mute icon stays red around it. Unplugged the tv to reset it but still no audio. ...

...audio went out. the tv is on a surge protector as well. The TV's power supply has certainly got affected.   Most probably some of the ground tracks might have got burnt along with a few ...

...TV AUDIO PROBLEMS MY SHARP ANALOG TV AUDIO WONT WORK THE SPEAKER IS OK Check and replace the damaged component/s at its audio output section circuit board. If needy, replace this board as card basis. ...

...tv, yet Wii wont tune into the AV input select. Any ideas? I have pressed 'Source' on the remote, then Side AV but the screen stays black and not with the Wii Menu Screen. Hi, the av lead with the ...