Sharp Aquos LC-42D62U 42 in. LCD HDTV "opc light tv blinking twice" Questions

...OPC light blink twice together followed by three blinks from the OPC alone. The main tv Tuner signal board have problems or it is dying or might be dead already.But sometimes this tv will still work ...

...OPC lights blink green once, then the power light blinks green twice. It continues that pattern. How many times does the POWER led blink per sec? (dont worry about the OPC) 2x = power supply (not as ...

...OPC light blinking. TV doesn't turn on. Power and OPC blink together twice, then the OPC light blink once and start sequence again. I tried some of the recommendations found in the site with no ...

...OPC light. Any clue as to how to fix it? follow this instruction and fix it. God bless you 1 Press the power button on the TV and not the remote control. It is possible the remote control's batteries ...

...OPC light both blink together, then just the power, then the two together and keeps repeating. If I hold my hand over each light to see thier blinking patterns separately - the power light blinks ...

...opc lights). Try switching out the cable or cables before going the service route. I contacted Sharp support and told that Power light blinks green twice per second. Immediately, the support person ...

...OPC indicator and power indicator blinks/flashes. This are indications that you have internal circuit/hardware errors. Possible causes. Corrupted firmware Lamp error or defect in lamp driver or lamp ...

...OPC light blink together once. any fix to this problem? Ur Tuner signal board have problems or dead.Ur power LED light indicator stable for a few mins before the power LED light,and the OPC LED light ...

...opc light blink twice at the same time and then the opc blinks once and it keeps doing that. Please help! Hi Make sure the AC cord is not loose or disconnected. Check to ensure the cord is firmly ...