Sony VAIO VGN-N130G/W Notebook "power self test" Questions

...Power On Self Test mode. It may be due to faulty RAM or even a power supply fault. Check your battery and try to boot from the AC Adapter. If that fails, and I assume it goes through part of its ...

...Power-on Self Test) problem or simply LCD problem. Here are some steps that you can try. 1. Remove the battery and the ac adapter then press the power button for at least 20 seconds to drain electric ...

...Power On Self Test (POST) Count the beeps - and whether long or short. (Like 3 longs and 2 short, etc) Go online to the Soony web site, or search for Sony POST codes. A list of codes will tell you ...

...power on self-test, it usually indicates some sort of hardware issue. You can see the messages by pressing ESC, DEL, or a F* key on power up. One quick thing I would do if I were you, would be to try ...

...power adapter, take the battery off the laptop, & using a dry tooth brush, scrub in between the fins of the battery connector on the motherboard & on the battery it self, then put the battery ...

...power adapter, take the battery off the laptop, & using a dry tooth brush, scrub in between the fins of the battery connector on the motherboard & on the battery it self, then put the battery ...

...power on self test) so its a hardware problem. the only suggestions i can give you is to : remove the memory from the back of the laptop,and if you have more than one stick ,swap them around as you ...

...self i have tried 3-4 times but it does not start Check to see if there are any keys stuck/depressed. If so, use a paperclip and fit it underneath the key and gently pry the end that is stuck. Make ...

...power button to turn on the computer.Press f10 when the HP/Compaq logo displays.After the BIOS Setup Utility displays, use the Right Arrow key to select the Diagnostics menu.Select HDD Self-Test ...

...Self Test, follow the steps below. If the notebook computer is running solely on battery power, plug the AC adapter into the notebook. Shut down the computer if it is running. Press the power button ...