...Tv have Tuner signal board problems.Every times Power and OPC LED lights flashes.Just push the remote power button again and wait.Sometimes Power and OPC LED light will flashes require push power ...
...tv LC-32D43U LOST POWER ALTERNATING FLASHING LIGHTS ON FRONT, FISRT POWER LIGHT FLASHES, THEN POWER LIGHT AND OPC INDICATOR LIGHT BOTH FLASH, THEN IT REPEATS. Tried unplugging and replugging in for ...
tv power button flashing (1) 4tinyhearts said: I unplugged the TV and held the buttons down and it continued to flash. I continued to hold down the two buttons and replugged it in again and it worked.
...Tv have Power and OPC LED lights flashes?Yes.Tries tv unplug,replug it back like about an hour later.The tv should be working again.This problems happen to Sharp tv alots,later on,should it happen ...
Question about Sharp Aquos Televison & Video
...power light will flashed twice again. The TV will not come on. In all the time that you have had the tv have you applied 2 firmware updates that some of the tv's need to avoid other known issues with ...
Question about Sharp Aquos Televison & Video
...tv turn,not POWER and OPC flashes again,push the power switch agian and wait.Have to do this like 3 or 4 times sometimes,than the tv backlight will come on,tv will work.Don't know but,if u require to ...
Question about Sharp Aquos Televison & Video
...TV doesn't work First turn on power light stable at all?Power and OPC lights well flash,but push on/off power button do this couple times after the Power and OPC flashes well backlight come back on ...
Question about Sharp Aquos Televison & Video
...the solution. With Great thanks. Hold the power button (on the TV in until the power light goes off (sometimes takes 10-15 seconds). Once light goes out, hold power button again until TV comes
Question about Sharp Aquos Televison & Video
...tv power is normally turned on/off) This problems is very common on Sharp tv after a year or two.I have one too 46" Aquos.The tv Tuner signal board have problems,but this tv still usable.My tv does ...
power button on the remote, the TV light turns green and then immediately goes to a flashing red light. I have also tried using the master switch on the TV (a solution that has worked in the past) and
454 questions posted
Usually answered in minutes!
878 Questions
295 Questions
241 Questions
202 Questions
163 Questions