Question about Sharp Aquos Televison & Video
...audio-video system? Changed to a new remote? Here is what I suggest: ONE: Give it a hard reset. Possibly the software codes in the power management are corrupted. Just unplug the tv line cord for 4 ...
source remotes that come with other equipment such as a satellite receiver, audio/video receiver, etc. Many of the so called universal remotes are not! I have run into this problem off and on over the
...Audio/Video source needs to be plugged into another input (located on the back of the TV) in order for this to work. The TV has to recognize multiple input sources to switch between them. code your ...
Question about Televison & Video
audio modes, source, P-mode) that are not covered by any aftermarket or universal remotes. Universals will turn on/off, change channels and audio levels, but make several functions no longer available
Question about Sharp Aquos Televison & Video
...Remote I cannot set up the TV as a source in the Bose Setup... If there is a setup code to the device you want to sync: with this remote, you can. If you wish to get more details; check the sites ...
...audio/video plugs, or if you have a TV/VCR combo, you will need to purchase and install an RF modulator (available at most electronic retailers). The light to dark picture? Condition is caused by the ...
...Audio You can step through the setup codes for this mode by pressing the "Channel Up" key to go forward through the codes or pressing the "Channel Down" key to go back to the previous codes. You can ...
...Source. Use this button to cycle through your available inputs. Once you've checked your connections run through the inputs and see if you get audio/video on any one of them. If you do, make note ...
...audio but no picture seen . my remote has a code cn-32902,as soon as i turn on i can hear everything but see nothing pls give me some kindof suggestion to fix it follow this instruction and fix it. ...
...audio. The input on the TV would be labled component in or input and a #. Simply select the input, or source button on remote to select the input that matches your choice and all should function. If ...
454 questions posted
Usually answered in minutes!
878 Questions
295 Questions
241 Questions
202 Questions
163 Questions