Canon EOS 400D / Rebel XTi Digital Camera with 18-55mm Lens "battery grip" Questions

...battery grip but if I takethe grip off HI I have been using a battery grip but if I take the grip off and put battery compartment cover back on it does not work at all. But does work with the grip. ...

...battery grip. It is 2 years old but over the last couple of days, the camera will not turn off when i use either the on/off body button or on/off grip button. it will only turn off if i loosen the ...

like to know how to remove the power grip. There is a wheel above the battery compartment on the power grip on the right side, (looks like a gear). Turn it left to loosen and it should slide right off

the battery grip is strong enough to get correct results or maybe too strong.I don't wanna fry my ciricuits! Yes, it's sufficient to operate the camera provided you have the proper grip for your model

...battery grip and reinstall...it starts to work find again. Are you using a genuine Canon grip? I've experienced contact problems with generics. That's not to say that you couldn't have the same ...

...battery grip. Sometimes it works, sometimes it doesn't. And sometimes the white balance button will flash repeatedly, even when the power is set to off. I've tried it without a lens. I've tried it ...

...grip, blow into the battery chamber, and reconnect it. of course, to only have it happen again after another dozen shots. it has crippled my efforts with candid shots. help! ...and thanks ahead of ...

...battery grip with the contacts up into the battery compartment on the camera, tighten the screw ring on the body to hold it in place, and insert one or two batteries in the tray. There is an on/off ...

...battery grip, but removing the grip and going back to my original battery, the problem still persists. Any advice??? Ross Try reformatting the card. I don't know if this camera allows you to do a low ...

...battery grip and had removed that to register my t2i (needed the serial number on the bottom) and never checked operation after replacing. I toyed with the lever using a pen and noticed the red light ...