Sony BRAVIA KDL-40S2010 40 in. LCD Television "replace backlight inverter screen working" Questions

...replace the inverter board as card basis. http://electronicshelponline.blogspot.com/ In some models of LCD TVS; the backlight inverter and its T'Con board will be a part of the panel itself, and will ...

...replace the backlight without replacing the entire panel? Regards Stuart I would suspect one or more of the miniature flourescent backlight lamps. One way to confirm this would be to power up the set ...

...inverter board. Check the backlights, busted backlight has a physical indication of fault like blackened end, crack end. You must replaced the busted one and your unit will back to normal operation ...

...inverter boards only job are to provide a backlight to the tv LCD screen panel to have screen light produce a picture.Tries websites like Shojimmy.com,Ebay.com to buy those refurbihes 1 or 2 long LCD ...

...LCD inverter boards help the LCD screen to have a backlight to produced a picture.Tries websites like Shopjimmy.com,Ebay.com to buy those 2 refurbishes long LCD inverter boards for the

backlight should kick in,the TV 'clicks', and shuts off. The 'standby' light then proceeds to blink 6 times. I looked up the code, and it indicated an inverter board error. Every so often, the TV with

...backlight inverter board, and the second one is with its main power inverter (supply) board.  Both of them are self repairable, if you have some idea in electronics. I've the repair ...

backlight system. When there is a problem with the inverter the whole screen will be completely dark, while the sound keeps going on. A problem with the inverter will mean that either inverter is bad,

...replace my inverter board, with a used board I found online. Not sure if the replacement has an error too, but will try to exchange it. On the old board, I did get the TV to power up with the ...

...backlight inverter board, look for bad caps first as suggested by TOOLKITS. You may have to diconnect the loads to see if the voltages come back. If you are going to DIY and have proper tools, ...