Sharp AQUOS LC-32D43U 32 in. LCD Television "60 inch tv remove" Questions

sharp aquos will not turn on. power opc light flashing I got a Sharp Aquos Quattron LC-60LE847U, a 60inch LED TV, I only brought it for a year and 4 months, factory only a have one year warranty. Last

inch TV...I started having sound problems...turned the volume way up to 60 maximum and could hardly hear it. Then after the TV was on for 4 or 5 hours, there would be crackling chirping popping noise.

60 inch lg tv. The remote just stopped working Put in new batteries. Tv button lights up on remote but will not turn tv on. Let me know model number of your 60 inch LG tv to find out possible cause of

60 inch tv model 601i-a3 will not turn on Sounds like it needs a tune up. Replace the spark plugs, plug wires, and fuel filter. The ignition is electronic so there is no distributor to replace. The ...

60 in lcd tv flickers I had the same problem with my 50 inch Maxent, found a solution on the internet that seemed too good to be true, but I replaced a part that cost me $1.38 at Radio Shack and my tv

...inch, is just two days old, just got blank while watching, we tried to switch on with remote, nothing happens, its just Samsung logo or screensaver on, please help We removed power cord & switch on ...

...inch model and after 30 - 45 minutes the TV screen will make a loud static noise then the screen will turn black with some white on it and turn off. The TV will then reset itself and then do it again ...

...60 inch Sony projection model # KDF-E60A20. Purchased March of '06. About 1 year and a half ago she started giving me problems. Every 30 secs or so tv would go "black" and no sound for about 30 secs ...

Samsung has standby light, it blinks tone sounds no green light. Replaced t-con, power supply and control boards. Will not turn on. Can be started by removing the t-con cable and waiting for led ...

...inch above the circuit board with the TV plugged in and on. If the inverter is bad or the frequency is too high for the multimeter, you will see a result near zero. If the multimeter gives a ...