...remove any remaining 6 parts under the retaining plate(# 3 thru #8). If the retainer plate is damaged and will not click back into place it may also be discarded. Re-intsall the he silver trim ring. ...
glue you can do it. I had the problem, here is what you do. 1 romove the five screws two on bottom NOTE one of the bottom screws is longer than the rest. two on side one on other side. 2 gently remove
...glue fals apart. remove one of the pins on wich it slides, and take the lens and the magnet out. 5) reglue the magnet and reasemble the camera. 6) power up and test, for me that solved the problem if ...
Question about Sony Cameras
...glue. But as I said earlier....so far, so good. The match stick solution is too primative and is usually only temporary. i carefully took the camera apart. I removed the top ribbon and also the card, ...
fingers and crazy glue. If still shows the error message attach it to the side of the space shuttle on its next orbit. hope Ive been some help CrazyLarry no seriously im fixing to buy one at ebay with
...glue. Your Card Door Sensor is probably broken off. Camera can be taken apart(gently), probably about 7 screws. Sensor will be at the bottom of camera near battery compartment. With a small blade, ...
57 questions posted
Usually answered in minutes!
1,133 Questions
959 Questions
541 Questions
528 Questions
411 Questions