...digital sources. That is a function of AV receivers in general, nothing to do with 901's. Your Pre-Outs get us around that possibility and limitation but it also means you need a moderately powerful ...
Question about JBL Audio Players & Recorders
...LFE. poor design, the amps that are screwed to the heat sink are below a transistor which is catching all the heat,heat rises and changes the bias of the transistor so high it causes runway in ...
Question about JBL Audio Players & Recorders
...Digital/DTS receiver or processor, make sure that the subwoofer adjustments on the receiver/processor are set up correctly. • Slowly turn the Level Control clockwise until you begin to hear the ...
Question about JBL Audio Players & Recorders
...Digital/DTS receiver or processor, make sure that the subwoofer adjustments on the receiver/processor are set up correctly. â?¢ Slowly turn the Level Control clockwise until you begin to ...
...direct a Front Channel signal to the sub, bypassing the internal dependency of directing only LFE to the sub. Granted, there may not be much low bass in the program but a working sub will ...
...digital AVR in mind for the future: Having a 901-based multichannel setup myself, I would highly recommend getting the Full Monte for video listening (below)... In that case a separate stereo amp for ...
36 questions posted
Usually answered in minutes!
151 Questions
87 Questions
76 Questions
51 Questions
54 Questions
