Canon PIXMA iP4300 InkJet Photo Printer "residual jam" Questions

Printer says paper jam, but there is no jam. Everytime it is to print, the alarm light comes on and says to remove paper jam. No jam is there! Printers use either small 'flags' to detect paper ...

...residual paper that may hamper printing. Refill the paper tray and try printing again. If the jam persists, repeat the process and search for more paper. hi, CANON PIXMA MP160 All-In-One InkJet ...

my canon printer is getting jammed, when it tries to run thru it goes on an angle to the left side and gets jammed, How do I fix this? That means that there is something jamming the paper on the right

Hi my canon mx 310 is jamming all the papers sent through it goes in ok and once it hits the wheel that turns the paper it is pushing it to the right and ripping the paper check for paper residue at ...

...residual charge to fade away before putting your hands or metal tools inside the chassis. 2. Step 2 Pin down the exact location of the jam. The three hot spots for a jam are the paper tray, anywhere ...

...residual charge to fade away before putting your hands or metal tools inside the chassis. 2. Step 2 Pin down the exact location of the jam. The three hot spots for a jam are the paper tray, anywhere ...

The paper in the printer is lined up and everything should be working however I need to print things for work and it tells me that it is either jammed or that I need to load/ reload the paper. I can't

...the machine. I slowly pulled the paper out in reverse. It did not tear or appear to have left any residual in the printer. After removing the paper I cannot get the printer to print. The orange ...

paper unable to feed Remove all of the paper from the paper tray and slide the paper guides all the way to the side. Examine the paper for any crumpled or torn pieces, then reload the tray. Make sure ...

Printer mp130 Any ideas?? Printer keeps saying cartridge jammed. I have tried taking cartridges in and out and the cradle that the ink cartridges sit in and doing a nozzle check, and doing a copy but ...