Canon PIXMA iP4300 InkJet Photo Printer "output tray changed" Questions

...output tray is open! I've just changed the large black ink cartridge. The printer no longer prints. Everytime, I get the instruction that printing 'cannot be executed because the paper output tray is ...

...tray, and although showing that is selected when a print instruction is sent, it immediately changes to the back feeder. there is a button wich will change output bin...find it and press...good

error paper output slot. the paper is jammed clear I can't use my printor because an error appears telling me there's paper jammed in the output slot, clear it and press ok. I'm sure there's no paper ...

...Output Tray. Put your finger in the rounded indent beside the Paper Output Tray and open it gently. (See <2> in Figure 1 below.) Open the Output Tray Extension. Open up and set the Output Tray ...

...tray is under the output bin). If you have paper in the rear feed, the green light should be on top of the printer icon left of the feed switch. If you have paper in the tray, the light should be on ...

...disabled in US versions. Look right above the paper output tray and you will see a 6 inch long and 1.5 in wide tray sticking parrallel to the output tray.Flip it back up and you should be good to

...output tray at the front of the printer. Lift the entire printer cover, which should snap open. Then lift the small inner cover. Press down on the tab below each ink tank to snap out and remove the ...

...that ition of the output tray is wrong. Just keep the output tray vertical with ground as refrence, lift it and bring back to horizontal position (or vice versa by pushing it down). Regards, ...

...output tray are open. Next open the paper output cover by rotating it down towards the output tray. The ink cartridge carrier should move to the ink replacement position on the right side of the ...

...output tray. Some Canon printers have two trays. the top one is used fro photo paper and the bottom on is used for ordinarty paper (it can be changed though). I'm guessing that the bottom tray is not ...