...resume. so i press enter and it says the same thing. Mis-pick means it didn't pick up a sheet of paper, you may need to clean the paper feed roller in the back above where you load paper for
Paper Mis-Feeding My printer has started to mis-feed paper. When I press print, the paper is picked up by the feeder and then one side (the right when looking at the printer) pulls and ultimately ...
me I have a paper mis feed. I have looked and find no problem. Hello sir; Pull out the paper tray ,check the paper senser is moving freely,clean the paper pick up roller, it will take care the problem
Question about Alps Office Equipment & Supplies
...pick up the ribbon cartridges? It could be a serious error with the cartridge changer. Take a close look at the chagner for anything that looks bent or mis-aligned. Also, may sure all of the ...
...pick up any cartridges. then the error ( orange ) light comes on. If you push the reset button it will cycle but only repeat the same process. Is this a mis-alignment problem or a mechanical problem? ...
Question about Canon PIXMA Office Equipment & Supplies
Mis-feeds paper and thinks it has paper jam Printer picks up a sheet on paper and feeds it 1/2 way through immediately upon loading paper. The green light is always flashing. When I try to send it a ...
...mis reads for paper jams. Again this is in the same area. 4) If the paper feeds out of the cassette about in inch and then jams for no apparent reason, it is usually caused from dirty/worn pick up ...
Question about Canon PIXMA Office Equipment & Supplies
...roller on Tray 2 a couple of months ago & this problem just started. Hi Natoli3, This could be a mis-match of paper sizes. Example, computer could be sending an A4 page to the printer. The paper ...
not picking paper for printing - Out of paper error the wheels might have mis-placed or a small piece of paper may be stucked with in it better check it. If this solution helpful/useful for you please
...mis-pick error. it may feed the paper just a little onto the roller on the cassette. This usually means the rollers are worn out. 2 of them to change, 1 on the cassette and one inside. They both have ...
2,715 questions posted
Usually answered in minutes!
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions
1,216 Questions