Question about Canon PIXMA Office Equipment & Supplies
mean? This means that the counter related to the amount of ink these pads absorb during print head cleaning cycles and from edge to edge printing is nearly at the programmed limit. You can still print
mp600 6A00 error tried all manual fixes nothing works, not under warranty, ended 3 Mo. 6A00 means the purge assembly is stuck, it usually sticks because of ink dried on the rail for the squeegee part.
pads are full and need replacing. Sometimes you can reset the counter but I have found that it is not worth it as you could end up with ink flowing from the printer onto your carpet. The simple answer
Question about Canon PIXMA Office Equipment & Supplies
mean it is in service mode). Keep pressing the ON button, press the RESUME button 4 times. (The light change every time you press it.) 3. Release both buttons and restart the printer. 4. Power ON your
...mean that you can carry on using your printer. However, this is only a short term measure. If your waste pads are saturated they will need removed, replaced or cleaned. This is how you can reset your ...
...inside the printer on the right hand side you will see the head cleaning mechanism. The 6A00 error means that this head cleaning mechanism is jammed. If you push the cleaning pad down gently with a ...
pads and squeaze or wash and dry them, after they are cleaned and dried, reinstall (re-seat) them. Now power on the printer and check again. Secondly, (remove the cartridges before you begin) open the
Question about Canon PIXMA Office Equipment & Supplies
My Canon Pixma MP450 keeps reading ink absorber full. What does that mean? Like peeling potatoes or oranges or apples, and throwing the peel into a garbage-bin, eventually the bin will get full, and ...
end-of-life. If the printer is under warranty, let Canon do the repair. Otherwise decide if this is worth repairing. Failure to clean the pads before resetting the counter will result in ink spreading
Question about Canon PIXMA Office Equipment & Supplies
...mean? How do you solve it A. There are two small pads inside rubber boots under the head. Cleaning these is easy, but does NOT affect the error message. They don't get very dirty anyway. The ink that ...
2,715 questions posted
Usually answered in minutes!
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions
1,216 Questions