Canon PIXMA MP160 All-In-One InkJet Printer "install encoder strip" Questions

...encoder strip for the carriage assembly. It is best installed in a repair shop as the printer covers all need to be removed for access. The part is only available to repair shops as well. hi, CANON ...

encoder strip. You're on the right track - I found the the purge cap (the white sliding mechanism that the print head parks to when it's not in use) was not lubricated well enough from factory. If you

encoder strip. You're on the right track - I found the the purge cap (the white sliding mechanism that the print head parks to when it's not in use) was not lubricated well enough from factory. If you

...encoder strip behind the carriage, and it's useless to shake a cartridge that is just ink with a cotton pad to control the flow to the printhead. hi, CANON PIXMA MP160 All-In-One InkJet Printer has ...

...install it. Thanks an encoder strip is seriously easy to replace! the strip rides thru a sensor on the ink cartridge carriage. one end hooks on to a small "hook"" on the left side of the plotter. the ...

...encoder strip may have gone out of range of the sensor, or it might be dirty . Resolution You need to check the encoder strip on the printer. This is a clear strip running the length of the printer, ...

...Encoder strip is Dirty. 4. Encoder strip is Out of position. Solution: 1. Open the front cover and check if ink cartridges lids are properly snapped in. 2. Turn the printer off and pull out the power ...

installing encoder strip Try reading the second thread at... Cleaning the encoder strip (Loud bang from printer carriage) Rick

...it. Now it won't align. ok, now clean the encoder strip with clean cotton. encoder strip found and the back of the printer ink assembly look like a plain white plastic. wipe that till it

...INSTALL Your printer detects the head is not moving or being blocked. Usually the problem is caused by the ink cartridge cover not fully closing, remaining paper, ink buildup on the metal rods on ...