Canon PIXMA MP160 All-In-One InkJet Printer "getting double paper feed error" Questions

getting an error mssg E3 after removing jammed paper fro my MP160 printer. Thks, Andr? As you will probably know E 3 on Pixma is paper jam. Double check that there is no paper inside, and turn printer

...double sided tape to get the chip to stick well to the cartridge), and with the cartridge now in the printer, Press and hold the Reset/OK Button for 5 seconds to reset the chips. The "Ink Low" dialog ...

...double-byte characters used in the file name - Images saved in a folder nested 4 or more layers deep INCOMPATIBLE CAMERA The printer cannot communicate with the connected camera. Disconnect the cable ...

getting a response from the digital camera or video camcorder this will happen. * ten flashes means it can not print to both sides of the page * eleven flashes means the automatic print head alignment

...Pick up rubber (top and bottom) has grip. You can buy a set of paper feeder about $25, or maintanenance that. Just add tape (double side tape) under rubbers. And check lubrication at paper

...paper jam in scanner document feeder. I have the same all-in-one printer and have just recently, the unit is a few years old, started having the same problem. I found that that if I make double sure ...

...paper dust. A quick way to double check this is to power cycle the printer & try to print from Tray 1, the MP feeder tray (unless Tray1 has rarely or never been used...it might be a little ...

...double sided the printer always errors with paper jam 1, even though the paper hasn't jammed. After printing the first side of the paper, the paper appears in the output tray, and is then taken back ...

...getting paper jam error message after I try to print on photo paper Some printers detect the type of paper you are using, and print accordingly. Do you have photo cartridges installed? If not, that ...

...double-udouble-u dot brianbell dot net for more information. I would recommend buying replacement flashrom from Sharp (if they still have them) or getting the most current version from a dealer. Not ...