Canon PIXMA MP530 All-In-One InkJet Printer "paper feed switch" Questions

feed paper. All of a sudden my printer quit feeding the paper - the error light comes on and states that there is no paper in the feeder - but there is paper in the feeder Check the paper feed switch,

paper feed I have used the printer for about 6 months now with no problems. However lately whenever the paper feeder starts to feed in a sheet of paper, the paper skews in one direction and thus jams.

...Paper Feed switch to light the Auto Sheet Feeder lamp. If the Auto Sheet Feeder lamp does not light even after pressing the Paper Feed switch, Paper Source in the printer driver may be set to the ...

...make adding paper obvious. if they are missing not only is it not going to be obvious, i am not sure that it will support and feed the paper correctly. you might have to use the front, lower,

paper per feed and try. it must detect the paper. if the paper is getting pulled in one side it must be OK with sensor. just a proper cleaning work may be required Hi, A possibility is the presence of

...Paper Feed Rollers Using The Unit's Operation Panel If the paper feed roller is dirty, paper is not fed properly because the paper feed roller slips. Cleaning the paper feed roller could resolve the ...

...paper feed tray, but it is not being picked up. The machine is also making a noise when trying to pick up the paper. It's a hollow plastic sound. On the control panel for the printer, there's a Feed ...

...feed path indicates that the paper is feeding okay. Your problem can be a jammed switch (loose scrap of paper), a broken switch, a switch disconnected from the controller board or a possible bad ...

...paper feed from rear feed to tray feed (paper tray is under the output bin). If you have paper in the rear feed, the green light should be on top of the printer icon left of the feed switch. If you ...

...feed paper. The screen says: "load paper...press OK" even though the cartridge is full. Pressing OK doesn't fix the problem. Your paper feed source is wrong .Go to the printers control panel and ...