Canon PIXMA MP530 All-In-One InkJet Printer "copy line" Questions

...cleaned, but I must be overlooking something. I do not get the line on the page when the copy is on the platen (as opposed to the ADF). Any ideas? i have the same problem although its a horizontal ...

soft, dry, lint-free cloth making sure there are no residues left, especially on the platen glass. Close the document cover and make a copy of a text document to confirm the black line has disappeared

When I use the adf to copy something there are always two lines on one side of the paper (to mark the copy). How can I change the setting for this problem. It does not occur when not using the adf. ...

Unwanted "line" on copied documents Recently, while making copies, a pencil thin line nows appears about 3 inches from the left edge and runs the complete length of the page on every sheet, why? and ...

...line occurs from top to bottom over the otherwise perfect copy. Its about 1.75 inches from the left margin of the page when the page is fed in top first. I cleaned the glass and its still a problem. ...

...line on copies and scans - not when i print Are you using the automatic document feeder (ADF) when copying/ scanning? If so, clean the area on the left side of the platen glass -- that is where the ...

Problem making copies (not print from my computer) When I make copies (not print from my computer) I get a black vertical line running down the middle of each page. Does the line show up when you ...

how do I get rid of the lines when I make copies. It dose not happen if I print a scan If you are using the ADF ( automatic document feed ) for your copies, raise the scanner cover and clean the strip

...Copier skipping lines Hi, We have been successfully using our copier all day. All of a sudden, a copy came out with lines missing. The area that had no ink on it at all was equal in size to that

...line which obscures content of the copy I tried the other solutions listed her - and no luck. After cleaning the ADF rollers, like the manual suggested - no change. I finally figured out why things ...