Canon PIXMA MP530 All-In-One InkJet Printer "copier ink edge paper" Questions

ink from smearing all over my papers When I print papers there are blobs or lines of ink of my papers. I didnt really think much of it until I wanted to print my photos. I can't get decent photos ...

...paper and have set the ink levels for "Other Photo Paper" on my Mac. The paper has been going through perfectly, but the ink is leaving little smudges on the edges of each text line. I've ...

edge of the paper and gently pull toward you until the paper is removed. 4Push the rear plastic cover tab back into place, and reconnect the power cable and USB cable. Attempt to print or scan another

...edge. observe where the nick is in relation to where the paper is fed and that will indicate where the obstruction is in the feeder. Use a bent paper clip (L shaped) and see if you can feel and ...

...ink Cartridges are supported) appears to catch the edge of the paper and rips the paper at the right hand corner then jams.It appers that the paper may not be lying fat when printing. Any suggestion ...

...edge of the paper and gently pull toward you until the paper is removed. 5 Push the rear plastic cover tab back into place, and reconnect the power cable and USB cable. Attempt to print or scan ...

...up crumpling. The print comes out on the very edge of the paper, it doesn't feed through. We've changed the ink, we have changed the paper, any ideas? Thank you. clean with special liquid

...edge will get a faint black smudge-line. A. What's a good way to clean the rollers B. What else could it be? C. Why in the heck does it only happen with brochure paper? Thanks for your help, Skylake ...

...edge paper guide over so that it touches the left side of the paper. 5) Turn on the printer (still disconnected from the computer) and try to feed paper manually (using the paper feed button). Press ...

...edge similar to when you have it on a plain paper setting. Have tried cleaning but this just uses more and more ink and does not resolve the problem, could it be that the print head needs changing. ...