Brother Multi-Function Center MFC-240C All-In-One InkJet Printer "press 9 sending fax" Questions

...9 Press . 10 If the printer is not set to the 24 hour mode, press or repeatedly to select AM or PM. 11 Press to save your settings. 12 Enter a fax number, or press Phone Book to select a number from ...

...9.) Ask the recipient to set recipient's fax machine to receive faxes. When you hear a high-pitched signal, press for color sending, or for black & white sending. Then hang up the handset. Scanned ...

...9.1. 4 Press Menu until Fax Feature appears on the bottom line of the display and press OK. 5 Press the Scroll buttons until Multi Send appears and press OK. 6 Enter the number of the first receiving ...

...Press RX Document Settings. 8.Select Memory RX, exit all the way out. 9.After a Fax is received, an envelope icon will be displayed next to the Job List Button. 10.To print received faxes, press the ...

...9. Press "Up" or "Down" repeatedly until "Send Setup" appears. 10. Press "Select." 11. Press "Up" or "Down" repeatedly until "Error correction" appears. 12. Press "Select." 13. Press "Up" or "Down" ...

...TX tone(periodical beep tone) press * 9 * of the telephone receiver. In auto mode go to fax setup select ans. to ring or auto fax etc. to activate atuo reveive of fax. Hope this may

...Press to resend the faxes (MP530 ) 4. Disconnect non standard fax protocol device from line 5. Enter outside dialing prefix before the fax number 6. Connect a different telephone line cord 7. Connect ...

display shows error A1: xy. Press the right arrow (Speaker +) button. What error codes do you see? (Machine saves the last ten errors). plz post here again.To leave the maintenance mode press 9 then 9

...the settings. When the telephone rings and you hear fax tones when you pick up the handset, press the Start button on the printer or *9* on the telephone attached to the printer. set the speed ...

....... Sandi / [email protected] on a lexmark if someone send you a fax ,first the machine has to be in fax mode ,then when the phone start ringing you have to press the start button or #9 ...