Sony Handycam DCR-SR40 Camcorder "reset camera" Questions

...reset the camera, but I can't find the button for that. Also, does resetting the camera mean I will lose my recording? Or will it just reset the options previously selected for filming and stuff? ...

...camera with the power on. The reset button is located (very small) on the function panel behind the LCD display. Activate with a pencil, paperclip, or similar. If resetting the camera doesn't work, ...

...help dissipate any power stored in capacitors. 4. Then let the camera sit for at least two days. This reset procedure worked for me when the cassette door on my camera got stuck open. Hope this

...There is a reset button on the side of the camera where the eject door is. Take a paper clip and hold the reset button in for 5-10 secs. The camera will beep, power on, open the door and it

i can't get my camera to record. It says camera recording disabled just reset the camcorder go to the menu and reset from factory settings

...charged battery pack. Remove the battery and reinsert after 1 minute. Reset the camera by following the reset procedure from the manual of the Camera. If the issue persists again, service is ...

...camera by pressing the reset button on the right side looking from behind. I understand you have to reset after removing the battery and also make sure you are not connected to the mains power

...cleaned the camera's heads. Now it's playing tapes. Reset the unit. The reset button is located at the bottom of the control pannel under the volume buttons this will reset the unit to factory ...

...RESET button, or pressing the button does not resolve the issue, continue with the troubleshooting steps below. Turn off the camcorder. Remove the battery from the camera. Remove the AC power supply ...

...fixed in my experience by resetting the camera with the power on. The reset button is located (very small) on the function panel behind the LCD display. Activate with a pencil or similar. Good