Sanyo DP42746 42 in. Plasma Television "power screen" Questions

...IS ON .. BLIKNING ON BOTTOM OF SCREEN SAYS OPC Try to use an advice from http://yefimsanswers.blogspot.com/2009/03/flat-screen-tv-opc-and-power-light.html Turning off with opc and power light ...

...power off and screen flashes blue ,green, red and black? Emerson flat screen won't power off and screen flashes blue ,green, red and black? Sounds like the main board causing that type of ...

screen appears. The vizio power indicator remains lit. I am new to LCD tv technology, but I suspect the main board is the problem. I can upload a picture of the screen if needed. Sounds like you had a

...screen will power up and work fine all day but as soon as you turn it off then on the screen will stay on for a minute then go black. What would be causing this? Most likley there are some bad ...

...tv unit. the power inverter board installed near the power supply board and then the screen back light is mounted at the upper and lower portion of the panel display covered with metal

...hdtv lcd 52 in tv will not come on. The screen is black. Yesterday, the screen was black and also no talking. Today, you can hear the talking but the screen is still black. Power board is

...light and the standby light turn on and the screen goes black. Can anyone help me out? press power screen reads digital television then the power light and stand by light turn on then screen goes ...

power it on at 5 second exactly the screen flashes for just a second then it stays black. Theory: I don't know a lot about TVs but it looks like the output to the screen is dead or the back lights are

I have a 47 inch flat screen LCD and the screen I have a 47 inch flat screen LCD and I lost power you can only see 1/4 of the screen any ideas? Bad capacitor(s) in the power supply.

...power supplies, for more info write to [email protected] While my problem is not identical it is very similar. The screen saver was on when I came into the room, so I hit a button a couple times as ...