Sanyo DP42746 42 in. Plasma Television "left side screen gone dark" Questions

SEE BACK GROUND PICTURE THE WHOLE SCREEN HAS GONE DARK / GREEN MOR ON THE LEFT SIDE BUT OLL OVER THE SCREEN Aberrations of picture on these sets can usually be traced to a problem with the t con board

...left side the darkness is advancing to the right side a little at a time. how can i correct this, is there any bulbs/Lamps that i can replace to fix this? Do some research for parts by the model ...

...side was very dark it used to fix itself in about twenty minutes. I replaced the t-con board no change. Than i removed one of the four connectors to screen but left one off to see what it'd look like ...

...left and one on the right..well the side of the picture you cant see is the same side of the faulty invertor..replace this and this should solve the problem.it is the cheapest option..if not..im ...

left side you will see two adjustment pots labelled Vsc and Vy. I first marked with a sharpie where the factory defaults were. Then I adjusted down (to the left) the Vy a little and the red spots were

left side of the picture screen that will not go away Problem - Sanyo DP42746 42 in. Plasma Television the picture is very dark I think there is some that has to be done since most people on here like

...left side of the screen. It is not that obvious, but noticeable. The strip does not go away. What should I do. One thing you can try IF you know how to work with electronics. Unplug and remove back ...

...left hand side of the screen has gone dark red to almost black almost 3/4's of the way across. It's just over a year old. I risk getting a bad rating from you, but it sounds as though you have a bad ...

...left side has gone dark. Problem? Doesn't correct itself at any time. If you wish to get some details; check the site linked here. Pull up older posts. ...

...left half side of the screen is dark and bleared, while the other side is normal stays like this for a while, then it is gone and it appears for about half an hour. I have had the same problem for a ...