Have sound. But no picture The Zsus and Ysus Board are common failures. It is a possibility that the Plasma Panel also is the problem. If you take the back off, (make sure unplug the set first), the ...
i turn it on and it turns itself right back off The Zsus and or the Ysus boards are common failures. You can unplug the Zsus board from the power supply and if the power stays on, I would replace both
lg 50px4d can anyone tell me the stk number for the zsus in this lcd. LG 42" Plasma TV 42PX3DCV Parts - YSUS ZSUS CTRL Part Number (set): 6871VSNB03E Part Numbers (individual): 6871QYH036D, ...
...It does not use a lamp. If the plasma does not show any picture, there might be a defective Ysus, Zsus or power suppy board. There is a high failure rate on the Ysus and Zsus boards. Search for a ...
...information, took the back panel apart on my 42HP66 Toshiba Plasma and identified the YSUS and the ZSUS boards. It appears that it *could* be the ZSUS board since it is making a high pitched noise ...
...on Google and you'll see plenty of pictures of what to expect. The third reason would be a bad ZSUS board EAX34042701 / EBR37284601 . Same as with the YSUS, only this is less common and, this
Trying to figure out if I have a faulty zsus board I have a LG 50px4dr. The screen was extremely dim. I was instructed to replace the zsus. I installed the replacement. Now the screen doesn't turn on,
The set turns on then goes to standby. there is a slight buzz sound that occurs before it goes to standby. Model is LG MZ-42PZ14 zsus board is faulty disconnect zsus supply set should come on
Have sound but no picture Zsus board can be the problem. check the fuse. zsus board is the one on the right side. if fuse is open replace board.
...is of too. Audio is ok. Is it the X-Z sustain board? What you need is an exchange or repair of your ZSUS board: ...
114 questions posted
Usually answered in minutes!
2,254 Questions
610 Questions
478 Questions
339 Questions
330 Questions