Kodak EASYSHARE 5300 All-In-One InkJet Printer "tec printers head error" Questions

...Tec could not solve problem. sent new print head. I installed new print head. Now print had stays to the right refuses to come to center. im sorry you are having that problem. you can try to download ...

TEC 572M barcode pot stake printer is stuck with the error "Head Open" even though it is closed. We have removed and replaced the stakes and shut the power on and off and still have the error and can ...

...TEC B-SX4 head temperature error? it's the correct version printhead for the model of MLB and the correct firmware, but problem still exists. This excess temperature may be caused by a temperture ...

error message "head open" any ideas why please? error message "head open" any ideas why please? Check the microswitch on the leftside of the print head. Sometimes a part is missing or the ...

TEC B-SX4 head temperature error Please give me more feedback, can't help you with that.

...get an 'open-head' message. All sensors seem to be in the right place There is a micro switch at the back which is responsible for this error.Either you strap it or place the lever at the top ...

...HEAD OPEN ERROR If you are sure that after putting in labels the head knob has been completely turned clockwise, thus locking the head in operating position, then most probably your head sensor is ...

head to see if anything looks abnormal also but see no visible problems. If there is an obvious answer please let me know. Other wise I guess it will have to go in to a tec shop. Thankyou!! Many times

TEC. I ALSO NOTICED THAT THE BACK TOP PART ALSO HAS A SPONGEY WHITE AND BLACK SPONGE STUFF. WHERE IS THIS INK ABSORBANT BOX.COULD SM1 PLIZ HELP MUBIN You can order the part directly from Brother ( ph

...or "TONE ADJ" whether you're using "Direct transfer" and increase one of this values: +5 should be good... I hope this can help you.. Regards.. Fernando ([email protected]) error : excess head ...