TV and reboot again. then it's fine. but I do the same switching back and forth from regular channels to HD channels, it freezes again. The problem your describing can be contributed to your cable box
...switch back the tv has not stored the vcr channel. our tv is a samsung cs29m21mn. most newer tv's wont store the channels if the channel isn't always putting out a signal. not much you can do about ...
Question about LG Televison & Video
Cannot get back to channel 3 Turn the TV off and then back on. Enter #0 #3 on the LG TV's remote and then push the OK button the remote. This will force the TV to go to channel 03 on the TV. Good Luck
...back to channel 4. Use the tv remote to put the tv on ch 4. Use the direct tv then to select channel of the direct tv box. The box is broadcasting to the tv on ch 4. Also check that tv is on correct ...
Question about Polaroid Televison & Video
...channels as soon as I get to channel 7.1 the TV gets "stuck", it won't advance past the channel or go back to previous channel. Up until two days ago 7.1 did not present any problems at all. Not sure ...
...do not have a built-in satallite tunner to tune in those sattallite channels, you have to use that company's external tunner box. No tunner box = no channels. Even U-Verse No Tunner Box = No
Question about Polaroid Televison & Video
...(if available), go to the setup choices and have the TV scan for channels while the Dish receiver is on. It will find channel 3 then, and probably nothing else, so the set will stay on that
...tv?? So I can get the channels back, example channel 4 isn't coming on! First you could try pulling out the plug to the tv from the wall outlet and leave it out for ten minutes or so and then plug it ...
...tv model 22LV505 is unable to show any channels. Icant even ge to the channel option to set it to auto search.previously I was able to get to lock and enter my password and try to get to channel ...
...73. Thanks for any ideas! Tries tv unplug,replug it back like about an hour later.For forcing the tv do a resetting itself back to the factory setting.The tv now should be recognizing channel
359 questions posted
Usually answered in minutes!
391 Questions
256 Questions
225 Questions
178 Questions
136 Questions