Polaroid FLM-3734B 37 in. LCD HDTV "means tv please scan channels" Questions

...unplug the TV (power) for five seconds then plug back in (reboot) and attempt the complete setup all over again. if it still fails, your tuner is bad...which means you need a new main

...TV by any means other than a coaxial cable, you do not need to run the channel scan. You should simply select the correct AV input using the AV key on the remote or the TV/AV key on the front of the ...

...please help? I think you are confusing the channel on the tv and the channel of the cable company that is not something that you can pick up with the scan tv, scan tv is good for picking up local ...

...means analog and digital channels?). However, the scan stops at some low percentile, and no channels are found. I have specified the tv to depend on "Antenna" instead of "Cable." I do not have ...

...means when it finished scanning, it found no channels. Check your cables to make sure they are connected properly. If you have digital cable and your tv is not digital, it will not find ...

...tv screen no picture only says please run channel auto scan It means it is not detecting signal etc.If you had a power outage unplug the set for a short period of time and plug it back----if using a ...

PIP" on the remote means and what and how to use it. Thanks in advance. -Ethan ([email protected]) PS I woudn't be able to return this TV back, the store that I bought this just filed Chapter 11. :

...means exactly that, however it can also mean the signal is too strong. If you have a booster installed into the ariel remove it, if not, try one. Make sure the TV is directly connected to the ariel, ...

...Please note, doing so will mean you cannot see the output of the recorder or cable box on channel 3 or 4 but must use its the video/audio (HDMI, component, composite, S-Video) outputs from it to the ...