...half the characters. Either the top half or the bottom half. Or the printout is totally unclear in the top half of page and progressively becomes a little clearer. However, characters are still ...
...characters down the left hand side of the print out print top half yellow - bottom half black!? Help It sounds like your black (K) or Black/Yellow (KY) head needs to be replaced. The problem appears ...
printing problem the printer prints half the character if for example its am an it breaks it into two and only prints the top half yet the test page it prints it well dear friend this is problem with ...
Question about Kodak EasyShare Office Equipment & Supplies
...half of the characters. I have put in a new cartridge. Hi! Its the print head that causes the bad printing!The head is the holder that the cartridges clip into!You can replace it but it might be ...
Question about Kodak EasyShare Office Equipment & Supplies
...half printing characters. Have put maintenance program on several times, but still no improvement. Dear Sueshpls, Your problem's seem cause of printer head. You should change it . I face so many ...
Question about Kodak EasyShare Office Equipment & Supplies
half the characters on a line of the black cartridge does not print Possible that the printing head is defective or the head is clogged. A repeated head cleaning must show a result or else try a ...
Question about Brady Office Equipment & Supplies
...half the characters printed. On second print I just got a series of lines. Then just a big block of black ink. I've tried switching it on and off, changed the label cartridge and I'm still just ...
Bar code I am trying to print a 29 character bar code (3 of 9). When I print on the 6500, (from an iSeries), it takes the full 8.5 inches of the paper. When I print on a laser it takes about half that
...half of the document was printed and then it will ask you to load another paper then it prints different characters. This sounds like the printer driver has become corrupted. Try unplugging the ...
Question about Zebra Office Equipment & Supplies
characters, the text is getting cutoff on either side (I would say approx a half inch on each side.) I set the media preferences on the printer to 4 x 3. The text will not extend the edges 4 x 3 badge
1,223 questions posted
Usually answered in minutes!
996 Questions
812 Questions
74 Questions
69 Questions
51 Questions