LG 42PC5D Television "good guys 42 inch tv" Questions

...42 inch Plasma. I tried to turn it on, and usually I get a green light on the bottom right side of the TV. Now, for some reason, the TV does not turn on and I get a flashing red light on the bottom ...

...42 inch plasma tv at sams club as a clearance item. I had the sales guy hook it up to make sure it works, but when I got home I cant get the tv to come on. I read the book but can tfigutre it out. I ...

...good things about their service. I had a whirlpool dishwasher fail over the summer and it took two weeks to get a service appointment and another 6 to fix it properly. I have the same problem with my ...

...guys, but I have to disagree. I couldn't be happier with my 42in Hitachi Plasma. I've had it for just over 11 months now and I've compared my set with a number of friends sets (Samsung, Sony, Sharp) ...

...42 inch LG plasma tv, I had it for about a year. It just started to leave a red hue/tracer effect when showing black colors during tv shows and movies, especially on the top and bottom of the tv. It ...

...guys, I also under stand that other manufactures models have same problem. This is a power board problem the problem is not the power board, but the unit that searches for signal and there lies your ...

...Good Luck Guys I too had the same problem, check out AVforums. I fixed this with the price of a fine tip solder. I resoldered the resistors in the bottom ribbon cable that drives that section of the ...

...Good Luck i am a true tec ive been doing this fo 27 years .the prob your having is y-sus board .the pop you heard was the ic under the big heat sink . common sense tells you if you have a blown fuse ...

...Guys, looks like, it is a thermal shutdown issue. Try the following: Keep a fan and direct the air towards the bottom vent holes. Switch on the TV. Keep it on continuously for more than 2 hours and ...

...good to go...Most monitors and tvs (lcd/plasma) I've seen you have to lay flat on the ground/bed/blanket etc, to work on (screen side down). Usually there are 2 or 3 screws (or a few more) to remove, ...