Canon imageCLASS MF3240 All-In-One Laser Printer "printing seems paper stuck jam" Questions

...seems like the sheet is not getting pulled back because one side prints. Most printer jambs are caused by a couple of things. Have you tried different paper? Sometimes paper that is curled, or if the ...

...Seems to be picking up the paper unevenly. There is probably a crinkled piece of paper stuck in the paper path somewhere causing an alignment issue. Open all the access panels you can and check ...

...seems fixed, that is, the red light stoped blinking. BUT it gets jams even more, every time, I wanted to print something, it got paper jamed. However, its copying function works fun. Any idea to fix ...

...paper but it looks clean and nothing seems to be jamming on the inside Have a look for any flag sensor actuators that may be stuck in the paper path, these are usually black flags that sit on a pivot ...

...seems to of worked for others Solution:- Use a piece of thin card, a magazine cover is what i used, make sure its A4 size then try to print something, as the paper starts moving push it through! and ...

...paper sensors is probably stuck. Some disassembly may be required to get to them. They are normally small plastic rockers that will let a small IR device either allow a beam of infrared light to pass ...

...printing, regular papers started to jam. It did not feed paper straight into the machine as it supposed to go, instead, it feeds only on one side. It seems that one of feeding rollers stop feeding ...

no paper jam, but the wheel that grabs paper seems stuck. Before you put papers in tray it must reshaple make separate each other , to delete the message "off the power " on again to continue printing

...the process of removing the jammed paper has to start all over. I have the same problem. It seems to me that the machine is trying to feed legal size paper from a letter size tray. I am working on

...paper feeder but then it seems to get off line and the paper get stuck and actually tears in the feeder. The printer then stops and an E lights up in the status box. Hi, Remove the jammed paper. ...