...This error takes place when feeding paper from the ASF after an error occurred in the ASF cam sensor. Make sure that there is no paper jammed in the printer and nothing is blocking the paper
...MP520. I switch the machine on, error code 6A80 appears telling me to switch machine off and start power on sequence again, if problem persists contact Canon service. There are no lights on the ...
...MP520 can print but not scan when trying to scan, there is an error saying that the scanner is not attached. Yet I can print on the same device without problems. I have downloades and installed the ...
...MP520 Error 6A80 has occurred - I have no manual but I know this has been caused because I unplugged the printer without switching it off by the on/off button. Can you help me please. Hi @ all, i got ...
pixma mp520 canon printer, brand new, when i turn it on it says an error has occured, turn off printer and turn on again, same thing happens every time, error code 5010 Take it back for exchange
Question about Canon Office Equipment & Supplies
...error occurred in the purge unit. You can remove the purge assembly and clean out all the ink covering the moving parts. You can clean it with isopropyl alcohol or just water. If no luck, replace the ...
MP520 ERROR 5700 Cannon have come back with"check there are no objects inside printer" but how can there be if this is a new machine? The problem is because the machine cannot read the ink.But i have ...
mp520 printer,scanner,copier all in one,while I was printing some paper got jammed,I canceled the printed and pulled the paper that was jammed out of the back,when I tried to resume printing it showed
Question about Canon PIXMA Office Equipment & Supplies
...MP520 Problem: Error code Cannon PIXMA MP520 Problem: Error code 5010 "printer error has occurred. Turn off power then back on again. If problem persists see the manual." there is nothing in the ...
Question about Canon Office Equipment & Supplies
MP520 error 6A90 - printer error has occured. Manual tels me to contact serviceman! Before removal of the logic board ***'y, remove the power cord, and allow for approx. 1 minute (for discharge of ...
426 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions