Question about Xerox Phaser Office Equipment & Supplies
...print anything the colour is faded, its ok at the top but at the bottom of the sheet its very faded, all of the colour toners are full, imaging units are fairly new, ive cleaned it, its got a brand ...
Question about Xerox Phaser Office Equipment & Supplies
bottom third of the page, and then intermittent streaks above that varying from about 1/4" to 3/4" deep, with about 3/4" to 1" space between them. It's erratic -- I just printed a document of about 30
...print several pages to the printer, see if the problem fades and goes away. If it does, just tell people to either stop feeding the blank pages through, or to at least turn them over and put them at ...
Question about HP Office Equipment & Supplies
bottom print faded and skips top half page okay, bottom print faded and skips problem Just installed a new cartridge check the wright cartridge model you installed and well pluged to the printer if it
...bottom of page I just installed a new black cartridge. When I made a print, the top of the page started out in sharp black. But, by the time the printer got to the bottom of the page, everything was ...
Question about Samsung Office Equipment & Supplies
...print page, there is a small vertical section running vertically about an inch or two in width from top to bottom that is not as sharp as the rest of the printed page. What may be causing this? It is ...
...print correctly; the bottom half of the line is faded do i just need to try a new cartridge? First try and go to page setup under file and set your bottom and top margins to .25. is every bottom half ...
Question about Xerox Phaser Office Equipment & Supplies
...bottom is faded When I print a document, the pages print 2/3 of the way perfectly, then it stops momentarily, continues to print and then stops. The last inch of the page prints very faded and then ...
Question about Xerox Phaser Office Equipment & Supplies
...print fades to the bottom of the page. the print starts out dark and then fades down the page, replaced toner and it is still an issue. dirty scanner.open the printer back cover.remove the scanner ...
Question about Xerox Phaser Office Equipment & Supplies
...bottom. I have created a test page of solid black lines and the pattern is 100% (as far as I can see) the same on each and every line. Pattern does not suggest a problem with the print roller. Just ...
34 questions posted
Usually answered in minutes!
436 Questions
284 Questions
262 Questions
152 Questions
147 Questions