Sony KLV32S200 Television "tv self diagnosis function" Questions

ERROR 6 TIMES NO POWER If you have a Sony Tubed TV; No Horizontal (H STOP), no raster, goes to the blinking self-diagnosis function immediately. Check C515 & 516 and the jungle IC, IC206.

...self-diagnosis code.Nine blinks - Panel Module Error or Thermal Error. If it is intermittent 9 blinks, meaning sometimes the TV comes on and other times you get flashing   Make sure the ...

...TV?s have a built in self-diagnosis function. If the timer/standby indicator is blinking, this could be an indication of a problem with the unit. The diagnostic blinking will occur automatically with ...

...self-diagnosis code. Check IC406 audio amp, PS401, and 402. On some projection models of Sony TV sets, this code means that T8005 (flyback transformer), or the associative components in the high ...

been muted or turned off by TV. If Stand By light was blinking 5 times the Stand By might have came out self-diagnosis function or mode. Contact Sony Service Tech for service adjustment to fix problem

...tv standby light flashing 6 times. Is this a problem I can fix, or do I need to have a service tech look at it? Those are diagnostic codes: Six blinks - No Horizontal (H STOP), no raster, goes to the ...

self diagnosis function is flashong red 2 flashes every 2 seconds Two blinks - B+ over current protection (OCP), unit goes to the standby mode then displays the 2 blink fault. Could be a short in the ...

self-diagnosis function. Something is wrong with the video. Check video out, Q705, 732, 761 and other components on the C board, also check Q218, 219, 220 on the A board. In addition, unit could be in