pebble 3 windows 8 driver Need windows 8 driver for my pebble 3 printer I'm really sorry, Pebble 3 will not have W8 Support Use the pebble 4 driver. I am using windows 10 and have tested on 8 as well.
...pebble 3 and a new coloured one, it will accept the coloured but not the new black one or the old one now, it just says error can you help me as i dont know what i have done? Hi, did you change the ...
I have a pebble 3 with a usb connection to a mac laptop. I need the driver for this and it is NOT working off the evolis site.... Driver is available on other sites also
I have an Evolis Pebble 4 printer. I am trying to print out cards from the Pebble 4, but the machine is not pulling the cards from the card holding tray. Because the cards are not being pulled from ...
Question about Xerox Phaser Office Equipment & Supplies
My Evolis Pebble 3 ink ribbon breaks after I print 2 cards. First clean Rollers and print head . Check if you have increased luminosity and contrast too much in printer Graphic properties. If this ...
Question about Xerox Phaser Office Equipment & Supplies
I have a printer pvc evolis pebble, but it does not want to print Hi, Check the connections of the printer and check if it prints the self test ( machine page ) Download the manual for better ...
Question about Xerox Phaser Office Equipment & Supplies
have a Pebble 4 card printer and the ribbon breaks after each card is printed. I have a Pebble 4 card printer and the ribbon breaks after each card is printed. the card are not being fed when printing
Printing Problem HiHere we have evolis printer for id card printBut we have a problem for without color designingSo plz kindly to solve problem for methanx Use color ribbon and set ribbon type in ...
My ink ribbon breaks after it prints 2 cards. I have an Evolis Pebble 3. Clean all transport rollers . check for X offset by giving Rx command in Properties/Tools/dialoge with printers. Increase ...
some force to push the new one in. I looked in the space with a flashlight and fished out a few ink pebbles with a ruler, but don't see anything obvious that could have obstructed the kit from sliding
548 questions posted
Usually answered in minutes!
284 Questions
262 Questions
152 Questions
147 Questions
158 Questions