...cause. I purchased a used 7750. It tested fine, but the color is way off, can't get it right. So I figured I would take this motherboard and put it into my old 7750 that was having the reboot problem ...
...reboot...the tech then got off the phone and whenever I looked at the printer it was looping the power-cycle, runs through the tests and completes, then say's initializing and restarts, no menu's or ...
Question about Xerox Phaser Office Equipment & Supplies
My Xerox Phaser 6250 won't duplex all of a sudden We have a wireless network and print to the Xerox Phaser 6250. All of a sudden it won't duplex, and not sure if it will colate either. 636-922-2282 or
Phaser 8560 error code Error Code 09,038.46:5960 on Xerox Phaser 8560. This error code appeared after a paper was jammed in the printer. The screen is stuck on the error code. I have also tried ...
...cause this error. Steps to resolve: Reboot the printer. Verify the lock arms rotate correctly. Check for spilled ink around the printhead (did you move it without waiting for it to cool down?) Check ...
Question about Xerox Phaser Office Equipment & Supplies
...cause this error. Please try this: Reboot the printer. Verify the lock arms rotate correctly. Check for spilled ink around the printhead (did you move it without waiting for it to cool down?) Check ...
Question about Xerox Phaser Office Equipment & Supplies
...cause fluid ink to spill and will almost certainly damage your machine. This fault can set a flag in memory which causes it to require a reset. To reset, scroll to troubleshooting and select, then ...
Question about Xerox Phaser Office Equipment & Supplies
...cause this error. 1. Reboot the printer. 2. Verify the lock arms rotate correctly. 3. Check for spilled ink around the printhead. 4. Check the process motor gears for damage. Ensure the process gears ...
...cause this error. Steps to resolve: Reboot the printer. Verify the lock arms rotate correctly. Check for spilled ink around the printhead (did you move it without waiting for it to cool down?) Check ...
...cause this error. 1. Reboot the printer. 2. Verify the lock arms rotate correctly. 3. Check for spilled ink around the printhead. 4. Check the process motor gears for damage. Ensure the process gears ...
548 questions posted
Usually answered in minutes!
284 Questions
262 Questions
152 Questions
147 Questions
158 Questions