...feed adjusted properly. Use the paper you are currently printing on for this procedure so that the thickness of that paper is factored in. If you stil see the banding after doing this, you can use ...
Question about Xerox Phaser Office Equipment & Supplies
...black line from top to bottom on the right side of the paper--anywhere from absent to barely visible to almost 1/4" thick, depending on the paper guides. My drum seems to have some toner buildup in ...
...Black thick strip coming along while scanning what might be the problem Something is stuck on your scanner "glass". This is a small strip of glass about an inch wide that runs from one side of the ...
Question about Xerox Phaser Office Equipment & Supplies
thick black lines in copies from the automatic document feeder but not from the scanner I have tried to clean the document feeder as instructions inuser guide (chapter 10) but cannot lift the document
...thick 1-inch black bar. Under this bar, should be a process gray bar about a 1/2-inch thick. Below this line should be a set of railroad like bars of cyan, magenta, and yellow. Should this test fail, ...
...in your User's Guide. Take a warm, damp paper towel and fold it so that it has about 4- to 6-ply thickness. Set the ink cartridge right side up on the damp paper towel so that the ink nozzles are ...
Question about Xerox Phaser Office Equipment & Supplies
...in your User's Guide. 2. Take a warm, damp paper towel and fold it so that it has about 4- to 6-ply thickness. 3. Set the ink cartridge right side up on the damp paper towel so that the ink nozzles ...
...thick white lines in the middle of line of print STEP: Disconnect and Reconnect the Printer Power Supply Additional Information 1. Unplug the power cord from the wall socket. 2. Disconnect the power ...
22 questions posted
Usually answered in minutes!
436 Questions
284 Questions
262 Questions
152 Questions
147 Questions