Question about Samsung ML Office Equipment & Supplies
...cartridge and installed a new fuse but the paper count did not reset. I dumped out the old ink before I refilled it. The count is at 9355. The print quality is pretty good. Does the total page count ...
fuse on the side of the cartridge and the light goes away. I took the fuse out just to see if it would work without it and it does...it still prints and the light still blinks. I'm on a new cartridge,
Question about Samsung ML Office Equipment & Supplies
fuse in the initial cartidge, but a space there for one. This is the original cartridge which was loaded with 1000 pages capacity (the replacement cartidge has 3000 pages capacity.) I have removed the
Question about Samsung ML Office Equipment & Supplies
...cartridge can be inserted and not seated properly though it may seem so. Have you tried to change the fuse? O.K. we all have the same problem. Red light is on, no jam and won't print. What is wrong ...
Question about Samsung ML Office Equipment & Supplies
...and remove cartridge. You will see little green lever. Lift it up! Look for piece of paper around the little black pawl (paper sensor after registration roller). Restart printer! Good luck ...
...remove ink cartridge but no use. This is a somewhat common problem with this printer. You are going to have to have the power supply repaired. The power supply in your printer sits right under the ...
...cartridge, remove fuse on back lower left side of cartridge, put cartridge back in printer - should work. you can then remove cartridge again and replace fuse - should still work. believe fuse is ...
remove the fuse. WHY is there a fuse on the toner cartridge in the first place? I removed the fuse from my replacement toner cartridge and my Samsung ML-2510 works fine, the CRU fuse error
Question about Samsung ML Office Equipment & Supplies
...cartridge/s, simply remove it and try again. You problem will be fixed. I hope your cartridge must be similar with this one.. (click here) Fuse: If you need further help, let me know. Good luck. ...
...remove the cartridge fuse and reinsert the toner cartridge. That worked for me and the CFU Fuse Error message disappeared for me, but I am trying to find out the PURPOSE of having a fuse on the toner ...
348 questions posted
Usually answered in minutes!
417 Questions
373 Questions
283 Questions
130 Questions
72 Questions