Samsung ML-2510 Laser Printer "manual gear" Questions

...or gear/roller problem as it sounds like it never boots up fully/passes boot tests. Have you tried looking for the light codes in the manual? You can also go to Samsung's site and pull down the

...gear in the top rotate, the online/error light is green. Suddenly, the sound stop and the light go on red and nothing happen. No one page printed. Can you help me? Thank you very much. this could ...

...another 50 pages) also: Double sided printing: After first sheet prints, you MUST turn over page manually, and then the light will flash hit the (you guessed it, RED button) to feed the reverse ...

...not in direct sunlight as they are light sensitive). There is a white gear at the side that you can manually rotate ( a bit stiff) to check for the possible fault. you can approximate the possible ...

red light stays on, but nothing moving after clearing paper jam tried to feed more paper while it was printing, and 1/4 inch stack was pulled in and jammed. turned off power and slowly pulled out ...

gear but cannot seem to find the part# in the manual. the service man says that the toner cart is driven by drum drive gear and the connection gear. Cannot find any reference to this gear. The machine

Canon MX360 shows code 6000. Have switched of printer and computer and the error is still there. What do i need to do? switched pc and printer off sounds like the gearing is out of sync. When you ...

...gear. 7. Run the Tilt Axis Drive test. 8. Run the Process Motor test. 9. Run the Head Maintenance Clutch test, if the test fails replace the clutch. 10.Run Wiper Drive test. If this fails inspect the ...

...get to clean the gear? download this Epson R230 Service Manual http://pcmediks.blogspot.com/2010/11/epson-r230-and-r230x-service-manual.html for more info visit

gear grinding noise. Out of warranty, would like to get manual or diagram of how it is put together to try DIY repair. (spelling error on model number, resent email) Unfortunately the problem can only