Question about Samsung ML Office Equipment & Supplies
...check the output roller after fuser unit(if there is), check them are spin or not, this roller kit use for pull the paper goes out the tray. if not spin means the roller drive belt or gear loosen. 3) ...
Question about Samsung ML Office Equipment & Supplies
...output tray, and is then taken back in and fed back into the printer. The paper then feeds back out leaving about an inch in the printer but with no back page printing having been carried out. I have ...
Question about Samsung ML Office Equipment & Supplies
...Check the input area for obstructions such as media in the path. Also check to see if the registration assembly damaged or unseated. 3. Replace any defective sensors or flags. 4. Verify the media ...
...Check inside the printer to see if the cartridge carrier latches that hold the ink cartridges down have popped open. Close the carrier latches STEP: Remove any Torn or Stuck Pieces of Paper from the ...
...Check inside the printer to see if the cartridge carrier latches that hold the ink cartridges down have popped open. Close the carrier latches STEP: Remove any Torn or Stuck Pieces of Paper from the ...
...Check the input area for obstructions such as media in the path. Also check to see if the registration assembly damaged or unseated. 3. Replace any defective sensors or flags. 4. Verify the media ...
...check fuser and pressure roller(near fuser) any pieces of paper there 4) after fuser to output tray all above step checking for avoid any pieces paper obstruct any sensor through all paper road, so ...
...check the paper feed areas of the printer to ensure that there are not any obstructions in the printer that would prevent the paper from feeding correctly. Once this has been verified, we can perform ...
...output tray. look inside the product..check for torn papers..gently pull out the paper fromthe roller...return the paper output tray and the carriage access door. plugthe power corn and turn on.. 4. ...
...Check for any obstructions under or around the carriage that prevent it from moving. Make sure that the carriage can move freely across the width of the product by firmly pushing the carriage to the ...
348 questions posted
Usually answered in minutes!
417 Questions
373 Questions
283 Questions
130 Questions
72 Questions