Epson Stylus CX3810 All-In-One InkJet Printer "getting double paper feed error" Questions

...Pick up rubber (top and bottom) has grip. You can buy a set of paper feeder about $25, or maintanenance that. Just add tape (double side tape) under rubbers. And check lubrication at paper

...getting the "Media Out" error when i tried to print it using the sheet feeder. It turns out that by puting a few blank sheets under the one I was using it lifted the paper enough so that it sensed it ...

getting an error mssg E3 after removing jammed paper fro my MP160 printer. Thks, Andr? As you will probably know E 3 on Pixma is paper jam. Double check that there is no paper inside, and turn printer

...paper jam in scanner document feeder. I have the same all-in-one printer and have just recently, the unit is a few years old, started having the same problem. I found that that if I make double sure ...

...paper dust. A quick way to double check this is to power cycle the printer & try to print from Tray 1, the MP feeder tray (unless Tray1 has rarely or never been used...it might be a little ...

...double sided the printer always errors with paper jam 1, even though the paper hasn't jammed. After printing the first side of the paper, the paper appears in the output tray, and is then taken back ...

...getting paper jam error message after I try to print on photo paper Some printers detect the type of paper you are using, and print accordingly. Do you have photo cartridges installed? If not, that ...

...double-udouble-u dot brianbell dot net for more information. I would recommend buying replacement flashrom from Sharp (if they still have them) or getting the most current version from a dealer. Not ...

...paper comes from. If you get a torch or light and look inside you will see two leavers (one double leaver and one single leaver). The single middle leaver is your problem, it senses to see if the ...

...Double-check the alignment. Shut the printer's lid. For large items, such as books, you may want to remove the printer lid rather than forcing it closed .Choose the kind of copy you want: ...