Question about HP LaserJet Office Equipment & Supplies
...paper sensor flag, located at tray2 pick up roller, its its stucked shoot the fault hp laserjet 4015 error code 13.98 paper jams in fuser. REpalced fuser, pick up rollers, separations rollers. ...
Question about HP LaserJet Office Equipment & Supplies
...pages at the same tie and they do not remain perfectly stacked (so it thinks the paper is longer than it really is). Check to make sure your pick-up rollers and paper separator are in good
Question about HP LaserJet Office Equipment & Supplies
...paper pick up assembly. Pull out the paper tray, one roller is in the front of the tray and two more are just inside the opening at the top. The rollers should have a rough feel to them not a ...
Question about HP LaserJet Office Equipment & Supplies
paper pick-up Its probly giving you the 13.1 error which means that there is a paper jam. But theres probably not. The printer just thinks that there is one. Replace the pick up rollers and everything
Question about HP LaserJet Office Equipment & Supplies
...paper pick up" error message that I i have a " no paper pick up" error message that I can't clear on my HP 3055 all in one printer. I checked the paper feed guides 1 and 2 and everything ...
Question about HP LaserJet Office Equipment & Supplies
P4015 constantly cycling when trying to pick paper from any tray. Won't pick paper or print, just continually cycles. No errors, never stops. try to clean all pick up rollers an separation pads
...are swinging freely, and not stuck in a open or closed position, which is what I suspect. If the paper pick-up does not even start to pick up the paper, then likely a paper sensor is stuck, or
Question about HP LaserJet Office Equipment & Supplies
41.5 is a paper feed error, take out the paper tray and clean the rubber roller above where the paper goes with a cloth just damp with water. Dirt on that roller will stop it from picking up the paper
Question about HP LaserJet Office Equipment & Supplies
...error by either not picking paper from the tray or picking it and not finish printing causing jam That suggests that the problem was not with the feeder or shaft, but with a sensor. Can you check the ...
paper pick up roller with a damp cloth. It is having trouble picking up the paper sheets, and you will get the error time after time. It seems that the recycled paper is worse than others. Remember to
205 questions posted
Usually answered in minutes!
1,429 Questions
1,001 Questions
724 Questions
663 Questions
593 Questions