Question about Canon Office Equipment & Supplies
...little silver bars contains a black piece of plastic which protects the cylinder when it is removed from the copier. not be fixed easily if you have never encountered problems and a little difficult ...
Question about Konica Minolta Office Equipment & Supplies
...for a paper jam and i unplug the little 3 black wire plug from the part of the tray that pulls back the copier warms up and is ready to print. Any ideas? thank you remove the little pieces of ...
...full please check volume sensor (it can be broken or little damaged). When you pull out the whole tray you will see a little black piece of plastik, which can be moved freely(sometimes stacks) ...
copy you would get a black line showing up corresponding to the place where you stuck the black tape. BUT the copier still thinks its all white. May sound a little confusing? but that's the just of it
to remove it the paper sometimes gets crumbled like an accordion there, htere is also a small black lever there see any paper is it stuck? The little lever fell into the copier can I get a replacement
Question about Dell Office Equipment & Supplies
...black ink cartridge. The sheets fed thru the ADF are traveling in front of a thin piece of glass (having the length a little bit bigger than the sheet's width). Try to lift the scanner's lid, ...
Question about Ricoh Office Equipment & Supplies
...What can be the problem? If the image is skewed on your paper, you have a registration bushing broken. If the image is OK on the paper, look for a piece of paper or a little thing in the way of ...
...if you have folding machine you must disconnect it and from the back of the machine after unscrew you see little white therm. with black cable placed under heater it's not expensive (30
black guide piece (2nd from left) is about the size of my little toe after I took it out. Use a flat head screw driver to pop it out... that should leave 3 black guide pieces left. Put the access door
Question about Canon Office Equipment & Supplies
...Black long plastic piece on top, came out, do not know which way to reinstall. Hello sir ; that piece is paper guide ,on the machine both side have a small hole to fit the paper guide and thepaper ...
758 questions posted
Usually answered in minutes!
995 Questions
574 Questions
501 Questions
509 Questions
441 Questions