...Carrier rapidly and aggressively slams back and forth. A very thin (8 inch?) piece of plastic has come undone from somewhere inside the printer. hi, Follow the wizard on the following website , to ...
...8 Press the third button down from the top on your control panel---marked by an arrow pointing from a scanner icon to a computer icon---for three seconds to print out a print alignment page. When ...
...carrier. 4. Close the printer cover. 5. Re-brick your printer. Pull out the power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds. 6. ...
...access door 5. Make sure the cartridges are snapped in place in the carrier. 6. Check for objects obstructing the carrier. 7. Plug in your all-on-one 8. Press power to turn your all-in-one back
carrier to the center.2. Check the encoder strip and make sure it is secured in its place.3. Close the printer cover.4. Re-brick your printer. Pull out the power supply, black box where the power cord
...carrier. 4. Close the printer cover. 5. Re-brick your printer. Pull out the power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds. 6. ...
...cartridges are snapped in place in the carrier. 6. Check for objects obstructing the carrier. 7. Plug in your all-on-one 8. Press power to turn your all-in-one back on. Hope this resolves your
...7 turn off first the printer 8 . Move the carrier manually from left to right ( 5x ) with your hands 9 . then once your done close the cover 10 .Turn on the printer Hope it help thanks
...carrier. 4. Close the printer cover. 5. Re-brick your printer. Pull out the power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds. 6. ...
758 questions posted
Usually answered in minutes!
995 Questions
574 Questions
501 Questions
509 Questions
441 Questions
