...you can pull the printhead out of the corner, look inside for paper scraps. If the printhead is stuck on the right, don't force it, but unplug the printer when the head is out of the corner to
Question about Brother MFC Office Equipment & Supplies
...printhead have molded pieces of ink stuck to it, and are causing it to rub off onto the paper. its not easy to clean, one possibility to take a lint free cloth slightly moisten, put it on the part ...
...stuck and not cycling properly. If you can power up and get the printhead to the center and unplug again, look with a flashlight in the far right corner where the printhead parks for any paper scraps ...
...printhead travel from right to left. Does it stuck somewhere? Reassemble the printer afterwards. When you dont get the printer back to work, there could be some more serious. you cant fix that by ...
Question about Brother MFC Office Equipment & Supplies
...stuck in the right-hand end where everything else is black, too. If you unplug the power, you might be able to pull the printhead out of the way by hand to get at the scrap. You'll need a flashlight ...
...stuck between the gear wheels. Pull papertray out and try to look from the bottom into the printer. Another way is to have a close look at the even left and right side from above when you open the ...
Question about Brother MFC Office Equipment & Supplies
...printhead. try to fix it in place again. Have a look at the foil (encoder strip): is it stained with ink? If yes you need a new encoder strip. If not you have to place the head on the leftside (where ...
Question about Brother MFC Office Equipment & Supplies
...stuck in the Brother printer. 95% of the paper I got out. The rest I do not see. But the printer does not start printing because some small piece of paper is some were inside the printer. Thanks for ...
...stuck in the printer. I can't see anything else and it looked like I got all the paper out. I turned it off and unplugged everything and it eventually turned into an "unable to change 32", but soon ...
Question about Brother MFC Office Equipment & Supplies
...Printhead stuck to the Wiper Blade? Start the printer in diagnostics mode and run diags test Exercise Heater - toggle Printhead heaters to soften the ink. Manual separate the wiper and Printhead. Set ...
112 questions posted
Usually answered in minutes!
1,135 Questions
1,012 Questions
743 Questions
623 Questions
406 Questions